Paper Title

AN EFFICIENT ATTRIBUTE BASED ENCRYPTION TO CLOUD DATA ACCESS AND ANONIMITY

Abstract

In literature many techniques were recommended to preserve the privacy of understanding contents by means of access control. In literature previous works have focussed on privacy of understanding contents in addition to get involved with control, while less focus is created towards privilege control in addition to identity privacy. We provide a privilege control technique that\'s semi-anonymous for dealing the issues of understanding privacy but additionally privacy of user identity inside the existed plan of access control. This privilege control method decentralizes central authority to limit leakage of identity and therefore gains semi-anonymity combined with the plan\'s tolerant against authority compromise. It permit cloud servers to deal with user access legal rights missing of knowing their identity information combined with the recommended plan\'s able to defend user privacy against every single authority and here partial particulars are revealed.
KEYWORDS : Access control, Cloud servers, Semi-anonymity, Privilege control, Data contents, Data privacy, Central authority.

Paper Title

ANALYSIS AND PERFORMANCE BASED EARTHQUAKE RESISTANCE DESIGN OF MULTISTORIED BUILDING IN ETABS

Abstract

Soft storey is an unavoidable feature in the multistorey building. It is open for the purpose of parking or reception lobbies and soft storey at different levels of the building for office use. It is also called as stilts storey. Masonry infill’s are normally considered as non-structural elements and their stiffness contributions are generally ignored in practice, such an approach can lead to an unsafe design. In the softstorey, the inter storey drifts and seismic demands of the columns are excessive that causes heavy damage or collapse of the buildings during a severe earthquake. The masonry infill walls though constructed as secondary elements behaves as a constituent part of the structural system and determine the overall behavior of the structure especially when it is subjected to seismic loads. In modeling, the masonry infill panels the Finite Element Method is used and the software ETABS is used for the linear dynamic analysis of all the models.
KEYWORDS : infill walls, multi storied buildings, earth quake resistance

Paper Title

LOAD CARRYING CHARACTERISTICS OF PILE RAFT FOUNDATION UPON DIFFERENT DENSITIES OF SOIL BED: A EXPERIMENTAL STUDY

Abstract

The analysis and design of pile raft foundation is a complex problem due to interaction between various elements of pile raft foundation and soil. A lot of research is being carried out to simplify the analysis and design. In this study a series of experiments on sufficiently large model were conducted to observe the effect of soil density on load carrying capacity of pile raft foundation(PRF). Centre to centre pile spacing and pile length of piles were also taken as variable to investigate the optimum c/c pile spacing and to observe which type of pile (shorter or longer) is suitable in soil depending upon their relative compaction. It was observed that optimum c/c pile spacing is four times of pile diameter irrespective of the relative compaction of soil media. It was also found that relatively shorter piles are more suitable in denser medium soil. The load carrying capacity of pile raft foundation and its rate increases with the compaction level of soil media upto 78% relative density of soil and afterwards the rate of increase in load carrying capacity start decreasing
KEYWORDS : Pile raft, rain fall technique, centric load, Relative density, Load carrying capacity

Paper Title

EFFECTIVE AND FAST CLOSEST NEIGHBOUR SEARCH WITH KEYWORDS

Abstract

Conventional spatial queries, such as range search and nearest neighbor retrieval, involve only conditions on objects’ geometric properties. Today, many modern applications call for novel forms of queries that aim to find objects satisfying both a spatial predicate, and a predicate on their associated texts. For example, instead of considering all the restaurants, a nearest neighbor query would instead ask for the restaurant that is the closest among those whose menus contain “steak, spaghetti, brandy” all at the same time. Currently the best solution to such queries is based on the IR2-tree, which, as shown in this paper, has a few deficiencies that seriously impact its efficiency. Motivated by this, we develop a new access method called the spatial inverted index that extends the conventional inverted index to cope with multidimensional data, and comes with algorithms that can answer nearest neighbor queries with keywords in real time. As verified by experiments, the proposed techniques outperform the IR2-tree in query response time significantly, often by a factor of orders of magnitude.
KEYWORDS : IR2-tree, “steak, spaghetti, brandy”,queries,

Paper Title

A STUDY ON BITUMONOUS MIX PROPERTIES USING WASTE POLYETHYLENE

Abstract

Bituminous mixes are most commonly used all over the world in flexible pavement construction. It consists of asphalt or bitumen (used as a binder) and mineral aggregate which are mixed together, laid down in layers and then compacted. Under normal circumstances, conventional bituminous pavements if designed and executed properly perform quite satisfactorily but the performance of bituminous mixes is very poor under various situations. Today’s asphaltic concrete pavements are expected to perform better as they are experiencing increased volume of traffic, increased loads and increased variations in daily or seasonal temperature over what has been experienced in the past. In addition, the performance of bituminous pavements is found to be very poor in moisture induced situations. Plastics are everywhere in today’s lifestyle and are growing rapidly throughout particularly in a developing country like India. As these are non-biodegradable there is a major problem posed to the society with regard to the management of these solid wastes. Low density polyethylene (LDPE) has been found to be a good modifier of bitumen. Even, the reclaimed polyethylene originally made of LDPE has been observed to modify bitumen. In the present study, an attempt has been made to use reclaimed polyethylene which has been obtained from plastic packets used in packaging of a very popular brand of milk named AMUL, in dry form with the aggregates like a fibre in a bituminous mix. Detailed study on the effects of these locally waste polyethylene on engineering properties of Bituminous concrete (BC), Dense Bituminous macadam (DBM) and Stone mastic asphalt (SMA) mixes, has been made in this study.
KEYWORDS : Optimum binder content (OBC), optimum polyethylene content (OPC), Bituminous concrete (BC), Dense Bituminous macadam (DBM), Stone mastic asphalt (SMA)

Paper Title

IDENTIFYING SUSPICIOUS FACEBOOK APPLICATIONS USING FRAppE TOOL

Abstract

With 20 million installs a day, third-party apps are a major reason for the popularity and addictiveness of Facebook. Unfortunately, hackers have realized the potential of using apps for spreading malware and spam. The problem is already significant, as we find that at least 13% of apps in our dataset are malicious. So far, the research community has focused on detecting malicious posts and campaigns. In this paper, we ask the question: Given a Facebook application, can we determine if it is malicious? Our key contribution is in developing FRAppE—Facebook‘s Rigorous Application Evaluator—arguably the first tool focused on detecting malicious apps on Facebook. To develop FRAppE, we use information gathered by observing the posting behavior of 111K Facebook apps seen across 2.2 million users on Facebook. First, we identify a set of features that help us distinguish malicious apps from benign ones. For example, we find that malicious apps often share names with other apps, and they typically request fewer permissions than benign apps. Second, leveraging these distinguishing features, we show that FRAppE can detect malicious apps with 99.5% accuracy, with no false positives and a high true positive rate (95.9%). Finally, we explore the ecosystem of malicious Facebook apps and identify mechanisms that these apps use to propagate. Interestingly, we find that many apps collude and support each other; in our dataset, we find 1584 apps enabling the viral propagation of 3723 other apps through their posts. Long term, we see FRAppE as a step toward creating an independent watchdog for app assessment and ranking, so as to warn Facebook users before installing apps.
KEYWORDS : FRAppE,

Paper Title

NATIONAL HIGHWAY HYDERABAD TO VIJAYAWADA GEOMETRIC ROAD DESIGNING

Abstract

Highway design and explains how they interact to create a basis for the preliminary route selection and design. Projects are followed from the initial provision of a topographic map and specifications through to the investment and user cost estimates of a particular highway. Vertical and horizontal alignment, drainage issues, and potential environmental impacts. Economic cost analysis and its applications, include an outline of route selection and design methods aided by digital terrain and computerized alignment modeling. Geometric design is an important phase in the highway design process that is directly related to traffic safety. Highway elements should be jointly designed to account for such design criteria as sight distance, vehicle stability, driver comfort, drainage, and aesthetics. Intuitively, such a design should be based on a three-dimensional (3-D) analysis. The National Highway geometric design is carried out on the assumption of design speed, which implies the notation of a “design driver”. Highway Traffic Safety Administration staff evaluated the actual costs, benefits and crash performance of current energy-absorbing steering assemblies as part of its review of existing major regulations. The evaluation was based on statistical analyses of Fatal Accident Reporting System, National Crash Severity Study and Multidisciplinary Accident Investigation data, cost analyses of production steering assemblies and review of test results. Energy-absorbing steering assemblies have significantly reduced deaths and serious injuries and they are cost-effective. Nevertheless, many seriousinjuries to the thorax and other body regions still occur with the current systems.
KEYWORDS : Highway geometric design, three-dimensional analysis, sight distance, vehicle dynamics, drainage, highway aesthetics, operating speed, drivers\' perception and behavior

Paper Title

HYDERABAD TO YADAGIRI GUTTA ROAD SAFETY AUDIT AND ACCIDENT ANALYSIS

Abstract

In most regions of the world, the epidemic of road traffic fatalities is on the upsurge with over 1.2 million people die every year due to road crashes and about 50 million suffer nonfatal injuries. Motor vehicle population has grown at a compound annual growth rate (CAGR) of 10 per cent 2000-2013, fuelled by a rising tide of motorization. Concomitantly, traffic risk and exposure have grown. During the year 2014, there were around 5 lakh road accidents, which resulted in deaths of 134,513 people and injured more than 5 lakh persons in India. These numbers translate into 1 road accident every minute and 1 road accident death every four minutes.1.5 the loss to the Indian economy due to fatalities and accident injuries estimated at 3% of GDP in 1999-2000 is particularly severe as 53.1% of road accident victims were in the age group of 25 to 65 year. Considering the above severity of the accidents recently National Highways Authority of India lunched massive Road Safety Audit Programmes to carry out the audit at Design stage, Construction stage as well as Pre-opening stage. The present study focuses on Road Safety Audit at construction stage conducted on NH-202 was discussed. The road safety audit at construction stage recommendations were given further improve the road safety at construction stage.
KEYWORDS : Road Safety Audit, Construction stage, & National Highways Infrared.

Paper Title

DESIGN AND LIFE CYCLE ANALYSIS OF POST TENSION REINFORCEMENT BUILDING BY USING ETABS

Abstract

In this project, we have seen and studied thoroughly some works on the site related to post tensioned slabs. The various sizes of tendons available, which are the materials imparting prestress to the structure were studied thoroughly. We have also understood and performed building column line staking on site. We have visited the site and taken part in the execution work under the structural engineer in-charge. The unbounded tendons are typically prefabricated at a plant and delivered to the construction site, ready to install. The tendons are laid out in the forms in accordance with installation drawings that indicate how they are to be spaced, what their profile (height above the form) should be and where they are to be stressed. After the concrete is placed( from the RMC trucks) and has reached its required strength, usually about 75% of its final strength, then the prestressing process begins. The concrete grade that was used was M35 and hence, after 7 days when it achieved the strength of 25 N/mm2, prestressing was achieved through Prestressing powerpack using a mono strand stressing jack. The principle is that when the tendons are stretched, want to return to their original length but are prevented from doing so by the anchorages. The fact that the tendons are kept in a permanently stressed (elongated) state causes a compressive force to act on the concrete. The compression that results from the post tensioning counteracts the tensile forces created by the prestress applied. This significantly increases the load-carrying capacity of the concrete.
KEYWORDS : Post-tensioned concrete , load analysis, slab analysis.

Paper Title

DESIGN AND ANALYSIS OF RESIDENTIAL BUILDING WITH FLOATING COLUMNS BY CONSIDERING FOOTING DESIGN

Abstract

Hyderabad is the fifth largest city in our country. As it is rapidly developing the construction in the city is very costly. Economic point of view if the building is constructed at a far distance from the city it will be cheaper and residents can live peaceful without any external polluted sources. Having a peaceful surroundings is the main objective in view of most residing people in present generation. Our proposed site is located at Vijaya buildings, Bandalguda, Nagole road, Hyderabad. The main road which is near to site leads to kamineni hospital. A branch road of 10m which is near is existing WBM road connected very near to the plot. The total area of the site is about 235.11sq m. the residential building consists of two bed room.
KEYWORDS : Building analysis, E-Tabs and bending momentum calculations.

Paper Title

EXPERIMENTAL STUDY ON HIGH PERFORMANCE CONCRTE (M80) WITH PARTIAL REPLACEMENT OF CEMENTY BY FLY ASH AND FINE AGGREGATE BY GLASS POWDER

Abstract

This paper deals with an experimental study on High Performance Concrete (HPC) with partial replacement of fine aggregates by Glass Powder and cement by Fly Ash. An attempt has been made to find the strength parameters of M80 grade concrete with constant water cement ratio and partial replacement of fine aggregate by Glass Powder and cement by Fly Ash. With increasing environmental pressure to reduce solid waste and to recycle as much as possible, the concrete industry has adopted a number of methods to achieve this goal by design, replacement and consolidation technique. Therefore, replacement of waste glass with fine aggregate should deeply investigation. The strength of concrete i.e., compressive strength, split tensile strength and flexural strength at 7days and 28days were obtained. The workability and durability has also been carried out. The materials like glass powder and fly ash are mainly using in these experiment to reduce the ¬ 〖co〗_2and sand mining.
KEYWORDS : High performance concrete, compressive strength, durability, glass powder and fly ash.

Paper Title

PHENOL ORGANIC IMPURITY REMOVE FROM POLLUTANTS WATER BY BATCH ADSORPTION STUDIES WITH USING MAGNETO CHITOSAN NANOPARTICLE

Abstract

magnetite Nanoparticle was prepare by co-precipitation of iron with aqueous NaOH The Fe3o4-chitosan magneto-chitosan Nanoparticle with a core-shell structure diameter of 20-40nm. (1) Use of magneto-chitosan Nano composites on the remove of organic pollutants from waste water. The water treatment became the most critical in all universe . Increase in the population and industrialization resulting into the water the impure water is toxic and carcinogenic for animals and human and in which technique can be used adsorption method for water treatment with mangneto-chitosen Nanocomposites.(2) The MCNPs use for this purpose can be best method; the magneto-chitosan Nano composites efficiency for remove of harmful in solution could be changed by applying moderate magnetic field magneto chitosan Nano composites were studied to remove phenol organic pollutants from waste water. A simple and an effective approach was used in regard to preparing MCNP on the chitin surface and chitosan- magneto MCNPs characterization method of FTIR,,,SEM,TEM, UV The magneto-Chitosan composite were optimized to remove organic pollutants, phenol with amount of adsorbent, initial concentration agitating time, initial concentration . Pollutants and pH parameters (4). In optimum conditions, room temperature, the magneto chitosan NPs could recover organic pollutants, phenol , the removal capacity of MCNPs has been increased to 48 %. The MCNPs composite have heavy adsorbents which could explore a bio-compatibility and strategy environment -friendly for organic pollutants removal, and appears to be the new promising material treatment pollutants water application.(5)
KEYWORDS : Magnetite, Adsorption, Chitosan, Phenol, MNCP nanocomposites.

Paper Title

DESIGN AND ANALYSIS OF ROTARY HEAD GEARBOX

Abstract

Rotary head is Heavy duty hydraulic driven top head rotation head unit with single speed or dual speed arrangement having infinitely variable speed (0 to 500 rpm) and is designed for required user torque and speed. This unit travels on the mast and is of sturdy construction to absorb sudden & varying shock loads generally encountered during drilling operations. Based on requirement selecting the type of Drive whether it is a direct drive or Gear transmission. If we select Direct Drive then the torque and speed to be achieved by the rotary head will depend upon the torque and speed hydraulic motor. Only one motor can be used when user selects the Direct Drive. In Direct Drive the Main spindle of Rotary Head is directly connected to the motor shaft by Providing the key slot on Main Spindle. Based on application we will be selecting the speeds of gearbox 1 speed or 2 speeds or 4 Speed Gear box. Only for Core Drilling we use 2 speeds or 4 speed gear box. In all other drilling applications single speed gear box has to be used. Doing analysis for maximum loads. In the present work the geometric model is created in Catia Software and imported to hyper mesh for convergent Finite element mesh and analysis. Stress and displacement on gear box are calculated by using Ansys software.
KEYWORDS :

Paper Title

CFD ANALYSIS OF HEAT TRANSFER AUGMENTATION FOR FLOW THROUGH A MICROTUBE

Abstract

This project deals with the analysis of heat transfer augmentation for fluid flowing through pipes using CFD. Using CFD codes for modeling the heat and fluid flow is an efficient tool for predicting equipment performance. CFD offers a convenient means to study the detailed flows and heat exchange processes, which take place inside the tube. Friction factor and Nusselt number for water flowing through the specified pipe (internal diameter = 0.022 m, length = 2.5 m) were obtained first for the smooth pipe and then for the pipe with a wire coil insert in the Reynolds number range of 250 to 25,000 and Prandtl number of 6.97. Three wire coils with pitch 0.033 m, 0.044 m and 0.0484 m, and coil diameter 0.00154 m, 0.00187 m and 0.002 m respectively were considered.
KEYWORDS : CFD, heat applications,wire coil inserts.

Paper Title

INTEGRATED MECHANICS FOR AUTOMATED MANUFACTURING SYSTEM-A CASE STUDY

Abstract

A system consisting of a set of interconnected stations for material processing that are capable of automatically processing a wide variety of types of pieces simultaneously and controlled by computers. Programmable mechanical manipulator (arm) capable of moving along several directions describing complex trajectories with its end effect or (the device that is attached to the end of the arm). It is designed to carry out factory work usually performed by human workers. Distribution feeder circuits usually consist of overhead and underground circuits in a mix of branching laterals from the station to the various customers. The circuit is designed around various requirements such as required peak load, voltage, distance to customers, and other local conditions such as terrain, visual regulations, or customer requirements. These various branching laterals can be operated in a radial configuration or as a looped configuration.
KEYWORDS : Integrated mechanics, industrial automation, conveyor systems.

Paper Title

A STUDY ON TEXT MINING TECHNIQUES AND APPLICATIONS

Abstract

Content Mining has transformed into an imperative research zone. Content Mining is the disclosure by PC of new, effectively darken data, by means of therefore isolating data from different created resources. Content Mining is the path toward isolating charming data or taking in or cases from the unstructured substance that are from different sources. The case disclosure from the substance and record relationship of report is an exceptional issue in information mining. These days, the measure of set away data has been hugely extending well ordered which is all things considered in the unstructured shape and can\'t be used for any planning to remove supportive data, so a couple of frameworks, for instance, portrayal, clustering and data extraction are available under the arrangement of substance mining. Remembering the true objective to find a capable and effective system for content request, distinctive techniques of substance game plan is starting late made. Some of them are overseen and some of them unsupervised method for record arrange. In this paper, focus is on thought of substance mining, content mining process, systems used as a piece of substance mining in like manner demonstrating some honest to goodness employments of substance mining. Additionally, brief talk of substance mining preferences and imperatives has been shown.
KEYWORDS : Text Mining, Information Extraction, Topic Tracking, Summarization, Clustering, Question Answering Etc.

Paper Title

IOT BASED IMPLEMENTATION OF E-LEARNING SYSTEM

Abstract

This paper exhibits a model for leading Internet of Things (IoT) classes in light of a web-benefit situated cloud stage. The objective of the composed model is to furnish college understudies with learning about IoT ideas, potential outcomes, and plans of action, and enable them to create fundamental framework models utilizing broadly useful microdevices and a cloud and administration foundation. The model depended on a cloud framework sent at the E-Business Department at the Belgrade University, and some usage points of interest are given. The model was tried and assessed in a pilot course.
KEYWORDS : Internet of Things, Raspberry Pi, Arduino, Cloud Computing.

Paper Title

A LITERATURE SURVEY ON FRIENDBOOK RECOMMENDATION SYSTEM THROUGH LIFE STYLE

Abstract

Presently all social sharing networking sites like Facebook,Twitter, Google+ recommending friends based on navigation instead of personal attitude will not , that can`t replicate users’ reality preferences on friend selection. In this paper, we present a life style primarily based on friend recommendation system for social networks that recommends friends to users supporting their life designs rather than social graphs. By exploiting sensor-rich smartphones, this technique makes an endeavor to derive life kinds of users by exploitation data obtained from sensors that\'s terribly user-centric. It, in addition measures the similarity of life styles between users, and recommends friends to users if their life styles have high similarity. It permits users to talk with friends. Friendbook expose life styles of users from usercentric sensor data, measures the similarity of life styles between users, and advice the friends to users if their life styles have high similarity .We further propose a similarity metric to measure the similarity of life styles between users, and calculate users’ impact in terms of life styles with a friend-matching graph. Upon receiving a request, Friendbook gaincoming a list of people with highest recommendation scores to the query user. Finally, Friendbook integrates a feedback mechanism to further improve the recommendation accuracy.
KEYWORDS : Data Mining, Friend Recommendation, Sensors, Android, Smartphones, Machine Learning, Lifestyle.

Paper Title

DETECT AN EYE VISION WITH A WEBCAM USING ITERATIONS TECHNIQUE

Abstract

This paper addresses the eye stare following issue utilizing an ease and more helpful web camera in a desktop domain, rather than look following methods requiring particular equipment, e.g., infrared high-determination camera and infrared light sources, and in addition an awkward alignment handle. In the proposed strategy, we initially track the human face in an ongoing video grouping to remove the eye locales. At that point, we join force vitality and edge quality to get the iris focus and use the piecewise eye corner finder to distinguish the eye corner. We embrace a sinusoidal make a beeline for mimic the 3-D head shape, and propose a versatile weighted facial elements implanted in the stance from the orthography and scaling with cycles calculation, whereby the head stance can be assessed. At long last, the eye stare following is proficient by combination of the eye vector and the head development data. Investigations are performed to evaluate the eye development and head posture on the BioID dataset and posture dataset, individually. Moreover, tests for look following are performed progressively video successions under a desktop domain. The proposed technique is not delicate to the light conditions. Exploratory outcomes demonstrate that ourmethod accomplishes a normal precision of around 1.28◦ without head development and 2.27◦ with minor development of the head
KEYWORDS : BioID , 3-D head shape, infrared light ,